Introduction
The main function of this workflow is to put a ring on a model. Since a ring is a small object with many details, it is difficult to achieve relatively precise control when migrating the ring with the traditional migration workflow, so it is necessary to process the product image. We need to control the size of the product image to be similar to the size of the mask, and the angle to be similar. At the same time, the model image should use a three-dimensional image with distinct edges and corners. After these processes, the generated image will be more in line with the requirements.
Workflow Overview
How to use this workflow:
Step 1: Upload model pictures
1.load product images.
2.Upload model pictures.For local cropping, use a mask to select the subject so that the features of the subject can be clearly seen.
3.Right click on the image and select the 'open in maskEditor' button, then paint the area.
Step 2: Upload product images and adjust product images
1.Upload product images.Product images need to have a clear structure and clear quality. They can be small, but not blurry.Upload a product image with a white background.
2.Rotate the product to better fit the model.Adjust the 'rotation' parameter to change the rotation angle.
3.Set the product size ratio to roughly match the model.The larger the value, the longer the image and the smaller the product. Adjust to the appropriate size.
Step 3: Masking
Manually apply masks on the model image according to product features.Right click on the image and select the 'open in maskEditor' button, then paint the area.